Cross Section Shape
⬤ Circle
⬭ Oval
▢ Rounded²
⬠ Polygon
〰 Wave
✏️ Free Draw
Cross-section preview
Long/Short ratio2.0
Tip shape1.0
Tip roundness0.0
Side flatness0
Tip tangent0
Curve profile (bell↔circle)0%
Sides6
Edge rounding0
Corner rounding0
Smooth0%
Long/Short ratio1.0
Corner radius5
Chamfer blend R0
Edge curve (width)0
Edge curve (length)0
Edge curve extent100
Curve profile (bell↔circle)0%
Smooth0%
Lobes5
Inner amplitude0.15
Outer amplitude0.15
Smooth0
Shape Preset4 pts
Mirror / Symmetry
Full (360°)
½ (2-fold)
¼ (4-fold)
⅛ (8-fold)
Point (mm)
Corner
0, 0 mm
Select
Pull any ◎ corner handle to adjust Radius R or Bevel live (hold Shift while pulling ◎ to adjust all corners together!). Double-click edge to add a point; right-click or Dbl-click point to remove.
Templates
Loading templates…
Body Profile
Image Size
Point (mm)
Corner
Drag points or bezier handles to shape the curve. Left double-click on the spline to add a point. Right double-click on a point to remove it. Press S or click the button to cycle handle mode: blue=smooth (curved), orange=sharp (angled), grey=none (straight). Scroll to zoom, use ✋ Pan tool to pan, or drag with the 🔍 area zoom tool to zoom into a region. Shift+drag to snap to grid/angle.
Wall & Base
Thickness2.4
Clay Shrinkage
Shrinkage12%
Wall-Box Mold System (M3)
Mount Threads (M11)
X spacing40
Y spacing40
X spacing50
Y spacing50
Wall clearance0.3mm
Foot
Quick Sketch Presets
A · Foot Ring & Outer Step
A1. Offset from edge2mm
A2. Outer height0mm
A3. Outer Draft Angle8°
A4. Foot ring width4.5mm
B1. Inner cutout depth1.5mm
B2. Inner Draft Angle8°
B3. Inside edge curve85%
C1. Dome arch height0.6mm
C2. Flat center area33%
D1. Top / Ledge corner R2mm
D2. Bottom contact outer R0.5mm
D3. Bottom contact inner R0.5mm
E · Bottom Outer Edge (Vessel Base)
E1. Bottom edge radius / bevel mm
E2a. Bevel bottom/foot edge R0mm
E2b. Bevel wall/outer edge R0mm
Handle
Handle Type (Sweep Path)
Position50%
X-Position (in/out)0.0 mm
Twist0°
Width scale1.0
Height scale1.0
Sweep Path (1:1 mm)
Point (mm)
Corner
Drag points or pull the ◎ corner-radius handles (Illustrator-style) in 1:1 mm scale. Enter R (radius) or Ø (diameter = 2R), or choose ∖ Bevel.
Cross Section Shape
Section width10mm
Section height10mm
Loft: Start scale1.0
Loft: Mid scale1.2
Loft: End scale0.8
Cross Section Editor
Point
Corner
Drag points to shape the cross-section. Left double-click to add a point. Right double-click to remove. Press S to cycle handle mode. Scroll to zoom. Yellow line = mirror axis.
Handle Mold System (Left & Right)
Draft Angle
Draft angle2.0°
Surface Patterns
Type
⬤ Dots
║ Lines
Mode
▲ Emboss
▼ Deboss
◯ Cutout
Shape
● Round
■ Square
Size5
Depth1.5
Layout
▦ Regular
⬡ Offset
🎲 Random
Count X (around)12
Count Y (vertical)8
Area start (Z)15
Area end (Z)85
⚠️ Mold lock at Z =
Print Plate Size
×
mm
Surface & Contours
Lighting & Render Style
Vessel Geometry Display
Mold & Master Inspection
Slice
0.0 mm
Rebuilding…